In appropriate use of workshop equipment can cause serious injury, so workshop safety precaution must be considered for the safety purpose. The hazardous situation in a workshop depends upon the size and complexity of the work that are carried out.
Workshop Safety Precaution
All the workshop safety precautions has been listed below.
- Read operator manual and observe all safety precautions for every available equipments.
- Check the power tools before using it.
- Give full attention to the work.
- Use a residual current device (RCD or safety switch) to prevent electric shock.
- Earthed the electrical tools to prevent possible electric shock.
- Always wear appropriate personal protective clothing and equipments.
- Must be properly ventilated.
- There must have sufficient fire fighting equipments proper first aid kit.
- Turn off the switch immediately if the power tools stalls or jams.
- Provide proper lighting for clear visibility.
- Replace or repair faulty or worn equipment immediately.
- Store power tools safely to prevent damage to the tools and cord.
- Use clamps and vice to hold equipments or machines whenever necessary.
- Must have proper sanitary and hygienic washing facility.
- Must have proper waste management facility.
- Keep all the moving parts of machines clean and lubricated.
- Remove oil, grease and dirt from the tools before using it.
- Do not keep sharp tools in pocket.
- Do not use electrical tools in wet areas and near flammable substances.
- Use insulated tools for the electrical work.
Conclusion
Hope, you have clearly understand about all these workshop safety points. Make sure to leave your opinion and suggestion about this post in the comment section below.